M&R Well Drilling drills Residential & Commercial Wells in and around Cleveland, Gainesville, Atlanta and North Georgia. Our water well drilling services include 6” residential wells, commercial wells and irrigation wells. You can trust M&R Well Drilling to deliver your well on time and for a reasonable cost.
Contact us today for a free well drilling estimate at 706-865-3286 or 770-531-0716.
--Residential Wells , Residential Irrigation Wells
--Commercial Wells, Agriculture Irrigation Wells
--Abandoned Well Sealing Certified by Georgia EPD
Residential water wells are essential for rural areas, and are often a necessity in urban areas. Although many rural areas have no other choice than drilled water wells, many homeowners prefer a private well to commercial water hookups, or need a private residential well for irrigation or for livestock. Regardless of why you need a residential or commercial water well drilled, M&R Well Drilling can help you.
Residential wells are drilled at a diameter of 6 inches, and metal or PVC casing is installed down to the rock level. The drilling continues until a supply of water is obtained for residential service. A well with three (3) gallons per minute (gpm) can sustain a family of four (4), about 250 gallons per day.
The average family uses 250 gallons of water per day in normal use. If you are using your residential supply for irrigation in addition to home use, you may need a deeper well so the reserve water in the well will support higher use. If you have a well that is not producing enough water, it may be improved by having it hydrofracked.
M&R Well Drilling has the right equipment and the expertise to get the job done efficiently for a fair price.
Our Commercial wells are usually 6” diameter wells drilled to support a community or a commercial manufacturing company, or perhaps a large farm or ranch. These wells are are usually drilled deeper to provide a higher volume of water. Commercial grade pumps from F&S Pumps or Grundfos are installed in these systems that are engineered to provide longer life and heavier volumes of flow. M&R Well Drillling will help you determine the depth of well and the pump system that is right for your requirement. We can also install reserve water storage tanks and water lines to help augment the system.
An irrigation well is an alternative way to irrigate your landscaping and garden. It is becoming an increasingly popular request due to the recent drought and limited use of county/city water. An irrigation well can be connected to your house or business in addition to your irrigation system. You can still maintain the connection to county/city water by having a cutoff installed that can be switched over by you when desired.
For irrigation wells, we normally drill 6” residential wells. The average residential irrigation system needs 25 gpm to supply all the zones, and a commercial system can require as much as 100-125 gpm. M&R Well Drilling will help you determine how much water is needed for your irrigation system and will help you engineer the most efficient system possible. A well that doesn’t yield the desired gpm to supply the irrigation system can be improved by hydrofracking or having cistern tanks installed to store the water. In some cases, both options are used.
Individual Household Well Loan Program - The Southeast Rural Community Assistance Project, Inc. has created a new Individual Household Well Loan Program. This program is designed to assist low to moderate income individuals needing loans to construct, refurbish and service their household well. Call M&R Well Drilling if you think you qualify and we will help you with your application and get your water system operational in a few weeks.
Click here for Individual Household Well Program Info Sheet & Application.
This entire process usually takes about 2 to 3 weeks.
The following are guidelines for the program:
·The maximum loan amount is $11,000
·Interest Rate of 1%
·Term is up to 10 years
·Applicant must own and occupy the home
·The well may not be associated with the construction of a new home
Application process:
·Applicant submits application
·Applications are usually processed within (10) business days
Approved application:
·Loan closing documents mailed to applicant
·Applicants have (2) weeks to return signed forms
·A lien is placed on the applicant’s property
·The Contractor is notified to proceed with work
·The Contractor is paid by Southeast RCAP, Inc.
We serve the Georgia cities of Athens, Atlanta, Alpharetta, Alto, Braselton, Buford, Clermont, Cleveland, Cornelia, Commerce, Cumming. Dacula, Dahlonega, Dawsonville, Duluth, Gainesville, Flowery Branch, Homer, Hoschton, Jasper, Jefferson, Lawrenceville, Lula, Maysville, Norcross, Oakwood, Pendergrass, Roswell, Snellville, Suwanee, Toccoa , Winder & other towns in North Georgia. Georgia counties include Banks, Barrow, Cherokee, Clarke, Cobb, Dawson, Dekalb, Douglas, Fayette, Forsyth, Fulton, Gwinnett, Habersham, Hall, Jackson, Lumpkin, Pickens, Rabun & White counties.